Listening to your favorite music in the truck is such a pleasure, isn’t it? However, speakers become obsolete over time, but improved versions appear and you get them. But if you are not a mechanic and want to install them yourself, it may seem like a difficult task. But it’s not that complicated really. I’ll help you figure out how to set up the Best Speakers for Ford F150 yourself and give you some very useful tips.
Follow these 5 steps:
You will need the following tools to install the speakers:
- Cordless drill
- Phillips screwdriver
- sockets
- Torx bits
- Female spade terminal
- Wire clamps
Step 1
First, you need to remove all the door screws as well as the handles on the windows and doors. This will not take you long! Typically, the Ford Ranger uses a combination of screws and plastic clips to secure the door panel to the door. Therefore, it won’t be that difficult.
Step2
Next, you need to remove the screws that mount the factory speakers to the door. To do this, squeeze the plastic tab on the wiring harness, disconnect the wires themselves, and simply remove the speakers.
Step 3
Next, be extremely careful! You need to take the plastic plug and cut it off at the end of the speaker wires. However, you might want to leave 1 inch of wire just in case. Use wire tongs to attach the internally threaded terminals to the wire ends and attach the wires to the replacement speaker.
Step 4
After that, install the speakers on the door. You may be able to use the factory screws to help. Then simply check the clearance by raising and lowering the window.
Step 5
Finally, put the door panel back and look at the gap between the panel and the speakers. Then change the door panel hardware and reinstall the crank.
In the end, you can turn on the music and make sure you did everything right! You can also additionally adjust the equalizer as you wish.
TIP
You should also be aware of the main points when installing the speakers on your Ford F150. For example, do not forget about the polarity of the speakers. This is extremely important when installing them. Reversed speaker polarity will result in poor sound quality. But there is a method to check the correct polarity: balance from left to right. Music should sound louder when the balance is set in the middle. However, if you have a quiet sound, then the negative and positive wires should be reversed.
That’s It!
Now you finally learned how to install the Best Speakers on a Ford F150. Don’t you agree that it’s not too hard? Besides, did you like my tutorial? Also, you can leave a comment about what you think about it and share this link with others.
Leave a Reply