Do you own a Ford Escape one of the most powerful and productive trucks? Surely you are already impressed with the efficiency of your Ford, but would you like to improve it even more? If you don’t know what else you can add to your vehicle, today I will present to you in detail all the ways to get it. After all, agree that it is essential to upgrade your truck if you constantly monitor the condition of the truck. Therefore, you always want to keep up with the times. So, if you are interested, read this article to find out how to upgrade your Ford!
Shocks for Ford Escape
Every driver knows that the worse the roads, the greater the shock absorber for Ford should be, and its main element is the shock absorber so that the Ford remains controllable in all road conditions. Usually, the wear of shock absorbers occurs gradually, and most often the driver, getting used to the new quality of suspension damping, just does not realize it until the extreme situation, when he has to “wake up” and notice the loss of control in some maneuver: lack of stability in a turn, more braking distance. But bad roads will not allow “noticing” the wear and tear of the suspension and shock absorbers for a long time. And, most drivers cannot avoid a complex repair of the suspension. That is why it is extremely important to change the shock absorbers on your Ford Focus.
However, after realizing the need to replace the shock absorbers, it is vital to be able to pick the right system of shock absorbers. Then, now you can choose not only the original Shocks for Ford Escape or shock absorbers that meet the original standards but also tuning shock absorbers with characteristics different from the original, allowing you to lower ground clearance and give the suspension sportier characteristics.
Exhaust System
The majority of SUV owners, to improve or replace the external characteristics of their truck often resort to tuning. As a rule, it concerns the appearance of the Ford Escape, it’s interior and technical part. It is possible to make single changes.
Recently, the tuning of the exhaust systems became popular. I strongly recommend you to buy or replace your exhaust system with a greater and more improved one. With its help, not only the appearance of the Ford is transformed, but also the power parameters are upgraded. The straight-through exhaust system is an essential attribute of automobile tuning. In fact, it is more common on “charged” cars. A standard truck’s muffler is a labyrinth of baffles, through which the gas flows. Moreover, its speed and sound certainly decline. Because of the presence of perforated parts, there is an effect of muffling high frequencies, on the principle of the resonator.
By tuning the exhaust system, you can resolve some difficulties. At first, there is an upgrade in the sound of the motor and transforms the appearance of the car towards the driving and aggressive. Then, by means of tuning, the power of the truck’s power unit is increased.
For sure it is necessary for you to have your truck running as a well-coordinated mechanism. Thereby, the upgrade of the exhaust system for Ford needs to be taken seriously. It is not advised to save money on this measure, because high-quality tuning can raise the power parameters of the Ford, and the unsuccessful one will only add more expenses and nervousness.
When selecting an exhaust tuning there are no special regulations. In this case, you need to proceed from your own wishes and finances, taking into account the possibilities of the car. If you own a sports car, you can not only improve its “sound” but also add a bit of horsepower by modifying the exhaust system. If the car does not have high power, you should concentrate on upgrading its visual perception, using external tuning.
Cold Air Intake
I advise you to get a new cold air intake system for Ford Escape, with which you will definitely improve your Ford for the better. In some models of trucks, the motor is mounted along the crossbar. This arrangement is typical of many cars and SUVs with small engine compartments. After all, you still need to set up the radiator, battery, starter, and alternator. Thereby, due to the limited space and poor air circulation, the cylinders are not cooled evenly and over time the most distant ones are destroyed.
Then, the advantages of a built-in air intake are obvious:
- the additional air supply, which improves with speed, provides better cooling of the motor compartment;
- the oxygen concentration is also increased due to the more pressure and low discharge temperature;
- the air intakes do not need to be powered. Some designs provide a direct connection to the injector’s or carburetor’s air intake pipe;
- the only correct solution for turbocharged cars, where fuel consumption improves with increasing speed due to its incomplete combustion in the cylinders;
- it reduces the wear and tear of motor parts and there is no need to enhance the motor to raise the power.
As a rule, on average, the useful power of the power unit increases by 5-10 horsepower, depending on the car model, when the car air intake on the hood is installed.
Brake Pads
Very often during tests of even new trucks, we are faced with the fact that the standard braking system sometimes does not behave as we would like. To put it simply – the brakes are not enough. And the range of vehicles, to which there are complaints, does not vary on the cost and prestige of the model – there is something to criticize the Chinese brands and even luxurious British. Another category of potential customers are owners of used and domestic cars, who are often willing to pay extra for higher quality and more expensive components. It is not worth talking about professional and even street racers: they have special requirements for the characteristics of the car.
As a result, it turns out that the improvement of brakes for Ford is a potentially popular service. The main tasks in the tuning of the braking system are two: increasing the braking speed and reducing the stopping distance. For each is responsible for separate parts, so first of all, you should understand that improving the characteristics of the braking process is a complex procedure that requires a thorough, and therefore competent and therefore costly approach.
Brake pads can be soft, medium, and hard, depending on the friction material. Here everyone decides for himself: if the car takes part in competitions, even an amateur, it is necessary to use soft pads as they wear out faster, but brake better. Hard brake pads are worse, but they have a longer service life, although they wear out the disc.
Ideally, you should use medium friction material pads: then the braking will be good and the disc with the pads will not wear out so quickly.
That’s It!
Now you know all possible ways to improve your Ford Escape. Absolutely all the upgrades I have presented today are definitely worth your attention and will definitely make your truck more powerful and more efficient. You can have no doubt about it, as you will see amazing results right after your new purchase. In the end, did you like this tutorial? Also, I suggest you also write about your experience and thoughts in the comments and share this link with your friends. Have a great trip!
Leave a Reply